Viser 1–24 av 56 resultater

34mm Chain Cutter

Chain cutter 34mm for use with ROV subsea, can also be used for topside cutting 32290-DS-001 Equipment Datasheet, CC34

6-48in Split Frame (SF) Bridge Slides series

E.H. Wachs DynaPrep MDSF Split Frame Bridge Slide is a multi-purpose accessory tool slide that can be configured for beveling, compound beveling, J preps, counterboring and facing flanges in your choice of finish. The DynaPrep MDSF Bridge Slide kits fit the previous generation Wachs LCSF Low Clearance Split Frame without modification, and can be fitted to the DynaPrep MDSF with the required DynaPrep MDSF Bridge Slide Mounting Kit. Cannot be used where obstructions exist across the Bridge Slide operating area, such as in heat exchangers. More info and models

Avtrekk Sett

Hi-Force-sortimentet av hydrauliske avtrekkssett, består av selvstendige og fjernstyrte, manuelt betjente, 2 og 3-veis kjevetrekkere, bærende kopptrekkere og krysshodetrekker. Serien tilbyr trekk kapasitet på opptil 50 tonn i de manuelt betjente versjonene, pluss fra 75 til 220 tonn på vognmontert 2- og 3-veis trekker. Mer info

AX 012 Flense maskin

A lightweight, portable, flange facing, grooving and weld preperation machine designed to machine full faced, raiced face and grooved flanges from 0mm-305mm (0''-12'') 32445-DS-001 Equipment Datasheet AX012

BB5000 Mobil Linjebor

BB5000 is the most compact, versatile and powerful line boring machine in its class. Easy to set up, designed to make quick work of tough jobs in spaces too restrictive for most boring machines. Easily configured for difficult machining applications. Rental Service Bar Diameter: 2.25 inches (57.2 mm) 1.25 inches (31.8 mm) optional Boring Diameter: 1.5 – 24 inches (38.1 – 609.6 mm) Max. Stroke: 36 inches (914.4 mm) Torque at Bar: 417 ft-lb hydraulic (565.4 N•m) Power Options: Electric, Pneumatic, or Hydraulic BB5-BB5000-E3

BOLT TENSIONERS

Det omfattende utvalget av Hi-Force hydrauliske tensioners, inkluderer både fjærassistert og manuelt stempel retur, onshore og offshore applikasjoner, hydrauliske tensioner mutter, spesiallagede tensioners laget for å kreve kundespesifikasjoner, sammen med en rekke manuelle og luftdrevne hydrauliske pumper, slanger og tilbehør. Mer info

Casing Jack 500T

Casing Jack for use where heavy lifting or pulling is required. Stuck casing Casing removal Casing cutting confirmation Slips bowl 13 3/8" 9332-02r1 Datasheet Casing Jack 500T

Conductor/rør Vasker 26-32»

26-32'' Conductor cleaner Lightweight & easy to handle Video Conductor cleaner 369 Equipment Datasheet - Conductor Cleaner

DA2 Batteri Boltetrekker

One nutrunner – three variants Improved performance through advanced engineering and optimisation of all mechanical components PLARAD_DA2_Blueline_22 Product info

Drilling Machine, Multi-Axial Power Drill 5 1/4»

The perfect drill for industrial applications, the Wachs Multi-Axial Power Drill is extremely versatile, designed to meet the unexpected needs encountered in the field. It is built of corrosion resistant materials and totally configurable. Whatever your application, the new variable speed, Multi-Axial Power Drill will get the job done. Powerdrill Brochure 31649-DS-01 Equipment Datasheet PowerDrill Video

Dual Drilling Machine 42-63» Auto

Dual Drilling Machine Unit, 42-63" Specifications: Tubular Capacity: Clamping 42”- 63” (1066.8-1600.2mm) pipe Drilling: Ø290, Stroke 620mm (24”) as standard. Power Requirements Hydraulic: 110 Liters per Minute @ 120 BAR Ambient Conditions Temperature (-20°C) - 50°C Atmosphere Offshore, Saliferous, 100% humidity Main Dimensions LWH: 4100 x 1890 x 1000 mm Weight net: 1305 kg (2877lb) 34033-DS-01 Equipment Datasheet, DDM 4263

DynaPrep LDSF Large Diameter Split Frame Clamshell Pipe Cutters/Bevelers 75-120 inch range

E. H. Wachs LDSF Large Diameter Split Frame with hydraulic drive is designed for cold cutting, beveling, facing and counterboring on large diameter pipes, vessels and flanges. It’s been engineered to incorporate multiple advancements designed to make it stronger and faster to set up and operate. Picking up where our MDSF split frames leave off, four standard LDSF Large Diameter Split Frame sizes will cover a range from 60in-120in O.D. (DN1500-DN3000). Each machine covers a 15in (381mm) diameter range and will simultaneously cut and bevel most wall thicknesses and materials. The internal, full bearing construction contributes to the LDSF Large Diameter Split Frame's smooth operation and long service life. Spring loaded O.D. (outside diameter) tracking slides for irregularly shaped or out-of-round pipe and vessels are standard, and allow the tooling to maintain continuous contact, producing precision weld preps with consistent lands. A new new CRBM Counterboring and Reverse Bevel module counterbores in vertical orientation, and reverse bevels in angled orientation. The LDSF Large Diameter Split Frame takes corrosion protection to a new level with virtually every surface treated. Its attractive red powder coated finish proudly reflects E.H. Wachs corporate colors. Product line Datasheet Video

DynaPrep MDSF Medium Diameter Split Frame Clamshell Pipe Cutters/Bevelers 2-72 Inch range

As the innovator and market leader in split frame technology, at E.H. Wachs we continually develop new products to meet our customer needs. Our split frames are easier to set up, easier to operate, and more powerful, for handling tasks like heavy wall form tooling. We designed the DynaPrep™ MDSF Medium Diameter Split Frame with accessory modules that vastly expand its capabilities. Building off of our experience with the LCSF Low Clearance Split Frame, the DynaPrep MDSF is engineered to surpass anything available today; benchmarked against the rest and built to be the best. Dyna means power, and E.H. Wachs DynaPrep translates to maximum power in cold cutting portable weld prep machine tools. Our core design principal is power combined with durability. Rugged and highly portable, E.H. Wachs’ DynaPrep MDSF offers unmatched form tooling capability on heavy wall pipe, including difficult to machine high alloy materials. Designed for cutting, beveling, counterboring, flange facing and more, it's available in eighteen standard models for nominal pipe sizes ranging from 2in - 72in O.D. (DN50-1800), with each model covering a generous 6in range. Sold as complete kits or individual components, the DynaPrep MDSF is available in your choice of pneumatic, hydraulic or electric drive. Dynaprep Video More info Product line

DynaPrep SDSF Small Diameter Split Frame Clamshell Pipe Cutters/Bevelers

The DynaPrep SDSF is a pipe cutting and beveling tool used by pipefitters and welders in weld preparation for industrial pipe. E.H. Wachs SDSF Small Diameter Split Frames are the smallest and most compact member of the Wachs split frame family of pipe cutters, and are designed for cutting, beveling and counterboring pipe and tubing from .5 inch - 6 inch O.D. (DN15-150). Like all our split frame, clamshell style machines the DynaPrep SDSF Small Diameter Split Frame is designed to “split” in half to fit over inline pipe, or can be slipped closed over open ended pipe. Six models are available in 1 inch (25.4mm) increments, with additional sizes available by special order. The SDSF is ideal anywhere pipe and tube are arrayed in tight places, such as pipe racks, and finds many uses in power generation, oil and gas and shipbuilding. The SDSF operates on air or electric power using standard Wachs motors and adaptors, and is part of a complete system that includes a broad range of tool slides and accessories for maximum versatility. As with all E.H. Wachs products, the DynaPrep Small Diameter Split Frame is built with our legendary quality and durability for years of reliable service. More info Datablad Product line tooling sheet Videos Pipe beveling

ECC External Casing Cutter

FECC External Casing Cutter utilizes Wachs split frame technology to cut a wide range of casing conductors externally above the wellhead. The ECC split frame mounts around the exposed casing O.D. above the wellhead and simultaneously cuts and chamfers. Ring sizes are available for most grades and weights of the exposed external casing (or drive pipe/conductor) up to a 26” (660mm) diameter, with the ECC 814 AIR being the most common. The ECC is based on Wachs proven split frame portable machine tool and takes advantage of the wide range of standard Genuine Wachs Tooling, requiring minimal axial and radial clearances. The ECC is available with pneumatic or hydraulic drive options. Remote handheld controls are optionally available for pneumatic powered machines. Features: External casing (drive pipe/conductor) cutting and beveling up to a 26” (660mm) diameter Utilizes standard Wachs Genuine Tooling for severing and chamfering Based on DynaPrep MDSF Split Frame technology Requires minimal axial and radial clearances; hydraulic or pneumatic drive Video Product line

EICC External Internal Casing Cutter

Wachs EICC External Internal Casing Cutter Kit is designed to cut and chamfer the casing internally below the wellhead, required for specific BOP installations. It is used in combination with an ECC Kit which makes the external cut required before installing the EICC. Once the external cut is made, the MDSF split frame from the ECC Kit serves as the drive platform for the EICC. A wellhead adaptor is required to mount the MDSF, either our universal adapter or a custom adapter built to your specifications, which serves as the mounting point between the wellhead and the MDSF. The EICC is assembled to the MDSF and lowered into the casing, and can be configured to cut down to a depth of 60in (1524mm). A reversing air motor is required and part of the EICC Kit, run forward to advance the tooling, then backwards to retract the tooling prior to extraction and completion. Features: Internal casing cuts from 7in (179mm) to 13 3/8in (340mm) casings Configurable to cut to an internal depth of 60in (1524mm) Used in conjunction with DynaPrep MDSF based ECC External Casing Cutter Requires universal or custom wellhead adaptor, sold separately Video

EX Coating removal system

The Coating Removal System is fully ATEX certified for use in Zones 1 and 2 areas without the need for a Hot Work Permit. The innovative and unique design of the rotating disc quickly and efficiently safely removes paint and other coatings from metalwork prior to repair or re-coating COLD WORK PERMIT LARGE SURFACE AREA FOR EFFICIENT REMOVAL EASE OF USE SAFETY TRIGGER UNIVERSAL AIR CONNECTION Datasheet GRO-SHH-ENG-DTS-008-Coating Removal System Data Sheet Videos NC Coating removal Coating removal PFP removal

EX Straight grinder system

The straight grinder system is fully ATEX certified for use in zones 1 and 2 areas without the need for a hot work permit. It can perform a wide range of grinding tasks using the varied files supplied as part of the system. The files are designed to provide a range of practical solutions when working with steel and with non-ferrous materials, specifically aluminium and also passive fire protection materials such as chartek and fendolite materials. KEY FEATURES COLD WORK PERMIT EASE OF USE SAFETY TRIGGER UNIVERSAL AIR CONNECTION Datasheet GRO-SHH-ENG-DTS-007-Straight Grinder System Data Sheet

EX Weld removal system

The Weld Removal System is fully ATEX certified suitable for use in Zones 1 and 2 without the need for a Hot Work Permit. The innovative and unique design of the rotating disc quickly and efficiently safely removes weld seams. KEY FEATURES COLD WORK PERMIT 10MM WIDE DISK SAFETY TRIGGER UNIVERSAL AIR CONNECTION Datasheet GRO-SHH-ENG-DTS-009-Weld Removal System Data Sheet Videos Cold cutting Weld Removal System video

FF1200 OD MOUNT FLANGE FACER

This safe, versatile, and rugged OD Mount Flange Facer can machine flanges up to 12.5 inches (317.5 mm) in diameter without any attachments. Designed for the rugged challenges of the oil, gas and chemical industry, this machine has the versatility to machine seven different flange types, including RTJ and compact flanges. With feed controls located remotely for “hands-free machining,” the FF1200 sets a new standard in operator safety while delivering up to 30% time savings on flange facing jobs. 31653-DS-001 Equipment Datasheet FF1200

FF206 Flange Facer ID mount

FF 206 flange facing machine faces from 2in (50.8mm) ID to 6in 152.4mm) OD, up to a 2in 150# flange. Pneumatic powered model features fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Pneumatic kit complete with HD air motor, mandrel, 7 leg extension sets, tool slide, tooling and storage case. Features: Faces flanges from 2in (50.8mm) ID to 6in 152.4mm) OD Record grove, RMS 500, 250, 125 and 63 finishes Kit complete with air motor and storage case FF Product line User manual

FF313 Flange Facer ID mount

FF 313 flange facing machine faces from 3in (76.2mm) ID to 13in (330.2mm) OD up to a 6in 400# flange. Pneumatic powered machine offers fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Kit complete with HD air motor, mandrel, 18 leg extension sets, tool slide, tooling and storage case Features: Faces flanges from 3in (76.2mm) ID to 13in (330.2mm) OD Record grove, RMS 500, 250, 125 and 63 finishes Kit complete with air motor and storage case FF Product line User manual

FF424 Flange Facer ID mount

Air powered FF 424 flange facing machine faces from 4in (101.6mm) ID to 24in (609.6mm) OD up to a 16in 150# flange. Fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Kit complete with HD air motor, mandrel, 23 leg extension sets, tool slide, tooling and storage case. Features: Faces flanges from 4in (101.6mm) ID to 24in (609.6mm) OD Record grove, RMS 500, 250, 125 and 63 finishes Kit complete with HD air motor and storage case Product line User manual