| Dimensjon |
|---|
OD40 Speedfacer Flensemaskin
The H&S TOOL SPEED FACER™ family are designed with safety and productivity-enhancing features that separate this line of machines from the competition. The remote feed control and auto-feed system allows for hands-free machining, keeping operators hands away from moving parts. The customized setup fingers and leveling feet allow the operator to easily set up the machine making it possible to go from crate-to-cut in 15 minutes or less. With infinitely variable feed rates and the ability to rotate the tool head and bits 360°, the SPEED FACER™ family has increased flexibility for higher metal removal, variable surface finishes, and the ability to create a variety of cuts.
Mounting Range 29,2-40,5″ (742-1029mm)
Mounting range with feet extension 19.2 – 40.5 in. (488 – 1029 mm)
Facing Diameter range 0 – 40.5 in. (0 – 1029 mm)
Pneumatic or Hydraulic – Belt Drive
Relaterte produkter
FF313 Flange Facer ID mount
FF 313 flange facing machine faces from 3in (76.2mm) ID to 13in (330.2mm) OD up to a 6in 400# flange. Pneumatic powered machine offers fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Kit complete with HD air motor, mandrel, 18 leg extension sets, tool slide, tooling and storage case
Features:
Faces flanges from 3in (76.2mm) ID to 13in (330.2mm) OD
Record grove, RMS 500, 250, 125 and 63 finishes
Kit complete with air motor and storage case
FF Product line
User manual
Travel Cutter SD
When E.H. Wachs is mentioned, the product that often comes to mind is our famous Trav- L-Cutter (pronounced “Travel Cutter”). First introduced in 1949, this portable milling machine is designed to cut and bevel simultaneously from 6in-72in O.D. (DN150–1800) on most pipe and vessel materials and schedules (optional drive chain sections required for OD greater than 48in).
Secured by its mounting/drive chain, the Trav-L-Cutter SD drives itself around the pipe as it machines, producing a weld ready surface. Driving around the circumference of the workpiece gives the Trav-L-Cutter SD an advantage over other machine tool types – the ability to accommodate any workpiece diameter by simply adding/adjusting the mounting/drive chain length.
More info
Video
SpeedPrep Pipe Bevelers Range 0-24 Inches
Wachs SpeedPrep SDB line of small diameter bevelers have been engineered for fast, precise onsite facing, beveling, compound beveling and counterboring of light and heavy wall pipe, tube or casing. Proven workhorses, they set up quickly with a self centering mandrel and chuck assembly mounting to the pipe I.D. Three models are available to prep from .875in-12.75in (22.2mm-323.9mm) O.D.
Wachs SpeedPrep EP 424 with the advanced AutoPrep autofeed system is a precision I.D. mount end prep machine tool designed to bevel, compound bevel, J prep, face and counterbore pipe, fittings and valves. Utilizing the revolutionary AutoPrep mechanism that feeds simultaneously in the axial and radial planes, the SpeedPrep EP 424 is simple to use, even for an inexperienced operator. It is powerful enough to form tool from 4in to 16in (DN100-400) through Schedule 160, and will single point from 4in-24in (DN100-600) up to a 6.5in (165mm) wall thickness.
Product line SDB
Product line EP424
Video EP424 model
Video SDB model
DynaPrep LDSF Large Diameter Split Frame Clamshell Pipe Cutters/Bevelers 75-120 inch range
E. H. Wachs LDSF Large Diameter Split Frame with hydraulic drive is designed for cold cutting, beveling, facing and counterboring on large diameter pipes, vessels and flanges. It’s been engineered to incorporate multiple advancements designed to make it stronger and faster to set up and operate. Picking up where our MDSF split frames leave off, four standard LDSF Large Diameter Split Frame sizes will cover a range from 60in-120in O.D. (DN1500-DN3000). Each machine covers a 15in (381mm) diameter range and will simultaneously cut and bevel most wall thicknesses and materials.
The internal, full bearing construction contributes to the LDSF Large Diameter Split Frame's smooth operation and long service life. Spring loaded O.D. (outside diameter) tracking slides for irregularly shaped or out-of-round pipe and vessels are standard, and allow the tooling to maintain continuous contact, producing precision weld preps with consistent lands. A new new CRBM Counterboring and Reverse Bevel module counterbores in vertical orientation, and reverse bevels in angled orientation. The LDSF Large Diameter Split Frame takes corrosion protection to a new level with virtually every surface treated. Its attractive red powder coated finish proudly reflects E.H. Wachs corporate colors.
Product line
Datasheet
Video
SDSF Socket Weld Removal
Precision socket weld removal is easily accomplished with the E.H. Wachs socket weld removal system. Utilizing the SDSF Small Diameter Split Frame as its foundation, our machine are offered in both axial and radial versions, depending on clearances or which component may need to be sacrificed. Fits available SDSF range of .5” to 6” (12.7 to 152.4mm) outside diameter.
Datasheet
Product line
DynaPrep SDSF Small Diameter Split Frame Clamshell Pipe Cutters/Bevelers
The DynaPrep SDSF is a pipe cutting and beveling tool used by pipefitters and welders in weld preparation for industrial pipe. E.H. Wachs SDSF Small Diameter Split Frames are the smallest and most compact member of the Wachs split frame family of pipe cutters, and are designed for cutting, beveling and counterboring pipe and tubing from .5 inch - 6 inch O.D. (DN15-150). Like all our split frame, clamshell style machines the DynaPrep SDSF Small Diameter Split Frame is designed to “split” in half to fit over inline pipe, or can be slipped closed over open ended pipe. Six models are available in 1 inch (25.4mm) increments, with additional sizes available by special order.
The SDSF is ideal anywhere pipe and tube are arrayed in tight places, such as pipe racks, and finds many uses in power generation, oil and gas and shipbuilding. The SDSF operates on air or electric power using standard Wachs motors and adaptors, and is part of a complete system that includes a broad range of tool slides and accessories for maximum versatility. As with all E.H. Wachs products, the DynaPrep Small Diameter Split Frame is built with our legendary quality and durability for years of reliable service.
More info
Datablad
Product line
tooling sheet
Videos
Pipe beveling
34mm Chain Cutter
Chain cutter 34mm for use with ROV subsea, can also be used for topside cutting
32290-DS-001 Equipment Datasheet, CC34
