MOMENT VERKTØY
Det omfattende utvalget av Hi-Force momentverktøy, inkluderer manuelle, luft- og hydraulisk drevent verktøy, tilgjengelig i et bredt spekter av størrelser og moment. Egnet for bruk i nesten alle stramme eller løsningsapplikasjoner. Som regelmessig kreves i mange industrielle applikasjoner over hele verden.
Kategorier: Hydraulic equipment, Sub Sea, Top side
Relaterte produkter
DynaPrep LDSF Large Diameter Split Frame Clamshell Pipe Cutters/Bevelers 75-120 inch range
E. H. Wachs LDSF Large Diameter Split Frame with hydraulic drive is designed for cold cutting, beveling, facing and counterboring on large diameter pipes, vessels and flanges. It’s been engineered to incorporate multiple advancements designed to make it stronger and faster to set up and operate. Picking up where our MDSF split frames leave off, four standard LDSF Large Diameter Split Frame sizes will cover a range from 60in-120in O.D. (DN1500-DN3000). Each machine covers a 15in (381mm) diameter range and will simultaneously cut and bevel most wall thicknesses and materials.
The internal, full bearing construction contributes to the LDSF Large Diameter Split Frame's smooth operation and long service life. Spring loaded O.D. (outside diameter) tracking slides for irregularly shaped or out-of-round pipe and vessels are standard, and allow the tooling to maintain continuous contact, producing precision weld preps with consistent lands. A new new CRBM Counterboring and Reverse Bevel module counterbores in vertical orientation, and reverse bevels in angled orientation. The LDSF Large Diameter Split Frame takes corrosion protection to a new level with virtually every surface treated. Its attractive red powder coated finish proudly reflects E.H. Wachs corporate colors.
Product line
Datasheet
Video
Kutte og fuge maskiner LCSF range 2-48 Inch
Low Clearance Split Frame Features:
• Machine quickly splits to mount around Outside Diameter of in-line pipe.
• Parts and accessories interchangeable between various sizes.
• Cuts and bevels pipe of any wall thickness. Materials include: carbon steel
and it’s alloys: Hastelloy™ and Inconel™ as well as other exotic materials.
• Self-squaring pipe clamping system with integrated, close tolerance
legs and wide feet for exceptional stability.
• Feed system offers low clearance operation with precise feed,
for controlled cutting.
• Low friction adjustable bearing system provides maximum stability
and extended machine life.
• Fully enclosed bearing and drive gear system for operational safety
Operates on pneumatic, electric and hydraulic
NC Split Frame
LCSF info
Videos
LCSF kutting
Subsea cutting LCSF
Wachs machines in action
Guillotine Pipe Saws
Guillotine Pipe Saws
The E.H. Wachs family of portable Guillotine pipe saws include models designed to cold cut pipe ranging from 2 inch - 32 inch (DN50-800), as well as solids such as bars stock, rails and beams. Their compact design and easy setup make it the ideal saw for contractors, pipeline operations, refineries, petrochemical and processing plants, and anywhere a fast, safe cut is needed. In use virtually everywhere, they’re strong yet lightweight, simple to mount, simple to operate and simply bulletproof.
Videos
Norse Cutting Guillotine saws
Guillotine industrial saws video
Travel Cutter SD
When E.H. Wachs is mentioned, the product that often comes to mind is our famous Trav- L-Cutter (pronounced “Travel Cutter”). First introduced in 1949, this portable milling machine is designed to cut and bevel simultaneously from 6in-72in O.D. (DN150–1800) on most pipe and vessel materials and schedules (optional drive chain sections required for OD greater than 48in).
Secured by its mounting/drive chain, the Trav-L-Cutter SD drives itself around the pipe as it machines, producing a weld ready surface. Driving around the circumference of the workpiece gives the Trav-L-Cutter SD an advantage over other machine tool types – the ability to accommodate any workpiece diameter by simply adding/adjusting the mounting/drive chain length.
More info
Video
Subsea Diamond Wire saws, range 4-84 inches
Wachs Subsea Diamond Wire Saws (DWS) are designed for underwater cutting of horizontal or vertical pipe or structures, with five models available to cut from 4in–84in O.D. (122–2134mm). Running on hydraulic power, the saws are controlled remotely with dedicated HPU controls, topside control panels or by ROV control operable via zero leak hot stabs.All Wachs Subsea DWS feature a unique hydrodynamic design that dramatically reduces centrifugal forces during operation, which means less power wasted in churning water and more power directed to cutting the workpiece.
SELF ADJUSTING AUTO FEED SYSTEM The Wachs Diamond Wire Saw is the only machine of its kind with a self adjusting auto feed system that controls wire tension, automatically matching the feed rate to the cutting rate. With the ability to adjust or stop the feed entirely until the cutting action catches up, it delivers a more efficient cutting action with minimal operator intervention and greatly extended wire life.
NC Subsea Diamond Wire saw R2
Subsea Pile cutting
EX Straight grinder system
The straight grinder system is fully ATEX certified for use in zones 1 and 2 areas without the need for
a hot work permit. It can perform a wide range of grinding tasks using the varied files supplied as part
of the system. The files are designed to provide a range of practical solutions when working with steel
and with non-ferrous materials, specifically aluminium and also passive fire protection materials such
as chartek and fendolite materials.
KEY FEATURES
COLD WORK PERMIT
EASE OF USE
SAFETY TRIGGER
UNIVERSAL AIR CONNECTION
Datasheet
GRO-SHH-ENG-DTS-007-Straight Grinder System Data Sheet
FF1200 OD MOUNT FLANGE FACER
This safe, versatile, and rugged OD Mount Flange Facer can machine flanges up to 12.5 inches (317.5 mm) in diameter without any attachments. Designed for the rugged challenges of the oil, gas and chemical industry, this machine has the versatility to machine seven different flange types, including RTJ and compact flanges. With feed controls located remotely for “hands-free machining,” the FF1200 sets a new standard in operator safety while delivering up to 30% time savings on flange facing jobs.
31653-DS-001 Equipment Datasheet FF1200