EX Straight grinder system
The straight grinder system is fully ATEX certified for use in zones 1 and 2 areas without the need for
a hot work permit. It can perform a wide range of grinding tasks using the varied files supplied as part
of the system. The files are designed to provide a range of practical solutions when working with steel
and with non-ferrous materials, specifically aluminium and also passive fire protection materials such
as chartek and fendolite materials.
KEY FEATURES
COLD WORK PERMIT
EASE OF USE
SAFETY TRIGGER
UNIVERSAL AIR CONNECTION
Datasheet
GRO-SHH-ENG-DTS-007-Straight Grinder System Data Sheet
Kategorier: EX Power tools, Top side
Relaterte produkter
FF313 Flange Facer ID mount
FF 313 flange facing machine faces from 3in (76.2mm) ID to 13in (330.2mm) OD up to a 6in 400# flange. Pneumatic powered machine offers fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Kit complete with HD air motor, mandrel, 18 leg extension sets, tool slide, tooling and storage case
Features:
Faces flanges from 3in (76.2mm) ID to 13in (330.2mm) OD
Record grove, RMS 500, 250, 125 and 63 finishes
Kit complete with air motor and storage case
FF Product line
User manual
ECC External Casing Cutter
FECC External Casing Cutter utilizes Wachs split frame technology to cut a wide range of casing conductors externally above the wellhead. The ECC split frame mounts around the exposed casing O.D. above the wellhead and simultaneously cuts and chamfers. Ring sizes are available for most grades and weights of the exposed external casing (or drive pipe/conductor) up to a 26” (660mm) diameter, with the ECC 814 AIR being the most common.
The ECC is based on Wachs proven split frame portable machine tool and takes advantage of the wide range of standard Genuine Wachs Tooling, requiring minimal axial and radial clearances. The ECC is available with pneumatic or hydraulic drive options. Remote handheld controls are optionally available for pneumatic powered machines.
Features:
External casing (drive pipe/conductor) cutting and beveling up to a 26” (660mm) diameter
Utilizes standard Wachs Genuine Tooling for severing and chamfering
Based on DynaPrep MDSF Split Frame technology
Requires minimal axial and radial clearances; hydraulic or pneumatic drive
Video
Product line
FF424 Flange Facer ID mount
Air powered FF 424 flange facing machine faces from 4in (101.6mm) ID to 24in (609.6mm) OD up to a 16in 150# flange. Fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Kit complete with HD air motor, mandrel, 23 leg extension sets, tool slide, tooling and storage case.
Features:
Faces flanges from 4in (101.6mm) ID to 24in (609.6mm) OD
Record grove, RMS 500, 250, 125 and 63 finishes
Kit complete with HD air motor and storage case
Product line
User manual
34mm Chain Cutter
Chain cutter 34mm for use with ROV subsea, can also be used for topside cutting
32290-DS-001 Equipment Datasheet, CC34
DynaPrep LDSF Large Diameter Split Frame Clamshell Pipe Cutters/Bevelers 75-120 inch range
E. H. Wachs LDSF Large Diameter Split Frame with hydraulic drive is designed for cold cutting, beveling, facing and counterboring on large diameter pipes, vessels and flanges. It’s been engineered to incorporate multiple advancements designed to make it stronger and faster to set up and operate. Picking up where our MDSF split frames leave off, four standard LDSF Large Diameter Split Frame sizes will cover a range from 60in-120in O.D. (DN1500-DN3000). Each machine covers a 15in (381mm) diameter range and will simultaneously cut and bevel most wall thicknesses and materials.
The internal, full bearing construction contributes to the LDSF Large Diameter Split Frame's smooth operation and long service life. Spring loaded O.D. (outside diameter) tracking slides for irregularly shaped or out-of-round pipe and vessels are standard, and allow the tooling to maintain continuous contact, producing precision weld preps with consistent lands. A new new CRBM Counterboring and Reverse Bevel module counterbores in vertical orientation, and reverse bevels in angled orientation. The LDSF Large Diameter Split Frame takes corrosion protection to a new level with virtually every surface treated. Its attractive red powder coated finish proudly reflects E.H. Wachs corporate colors.
Product line
Datasheet
Video
SDSF Socket Weld Removal
Precision socket weld removal is easily accomplished with the E.H. Wachs socket weld removal system. Utilizing the SDSF Small Diameter Split Frame as its foundation, our machine are offered in both axial and radial versions, depending on clearances or which component may need to be sacrificed. Fits available SDSF range of .5” to 6” (12.7 to 152.4mm) outside diameter.
Datasheet
Product line
TAF330 Flense maskin
TAF330
Flange Facer for flange size 2-13"
¨ Type: external mounting
¨ Min.-max. facing: 0-330mm DIA
¨ Min.-max. clamping: 80-330mm DIA
¨ Axial movement: Manually adjustable
¨ Axial feed: 70 mm
¨ Radial movement: Trip feed system
¨ Radial feed: 165 mm
¨ Each activator= feed of 0,16mm/rev
¨ 6 activators= Max. feed rate of 1mm/
rev
¨ RTJ grooves machining
¨ Bores and conical machining
Video TAF series