EX Coating removal system
The Coating Removal System is fully ATEX certified for use in Zones 1 and
2 areas without the need for a Hot Work Permit. The innovative and unique
design of the rotating disc quickly and efficiently safely removes paint and
other coatings from metalwork prior to repair or re-coating
COLD WORK PERMIT
LARGE SURFACE AREA FOR EFFICIENT REMOVAL
EASE OF USE
SAFETY TRIGGER
UNIVERSAL AIR CONNECTION
Datasheet
GRO-SHH-ENG-DTS-008-Coating Removal System Data Sheet
Relaterte produkter
FF313 Flange Facer ID mount
FF 313 flange facing machine faces from 3in (76.2mm) ID to 13in (330.2mm) OD up to a 6in 400# flange. Pneumatic powered machine offers fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Kit complete with HD air motor, mandrel, 18 leg extension sets, tool slide, tooling and storage case
Features:
Faces flanges from 3in (76.2mm) ID to 13in (330.2mm) OD
Record grove, RMS 500, 250, 125 and 63 finishes
Kit complete with air motor and storage case
FF Product line
User manual
Subsea Diamond Wire saws, range 4-84 inches
Wachs Subsea Diamond Wire Saws (DWS) are designed for underwater cutting of horizontal or vertical pipe or structures, with five models available to cut from 4in–84in O.D. (122–2134mm). Running on hydraulic power, the saws are controlled remotely with dedicated HPU controls, topside control panels or by ROV control operable via zero leak hot stabs.All Wachs Subsea DWS feature a unique hydrodynamic design that dramatically reduces centrifugal forces during operation, which means less power wasted in churning water and more power directed to cutting the workpiece.
SELF ADJUSTING AUTO FEED SYSTEM The Wachs Diamond Wire Saw is the only machine of its kind with a self adjusting auto feed system that controls wire tension, automatically matching the feed rate to the cutting rate. With the ability to adjust or stop the feed entirely until the cutting action catches up, it delivers a more efficient cutting action with minimal operator intervention and greatly extended wire life.
NC Subsea Diamond Wire saw R2
Subsea Pile cutting
Drilling Machine, Multi-Axial Power Drill 5 1/4»
The perfect drill for industrial applications, the Wachs
Multi-Axial Power Drill is extremely versatile, designed to
meet the unexpected needs encountered in the field. It is
built of corrosion resistant materials and totally configurable.
Whatever your application, the new variable speed, Multi-Axial
Power Drill will get the job done.
Powerdrill Brochure
31649-DS-01 Equipment Datasheet PowerDrill
Video
EX Straight grinder system
The straight grinder system is fully ATEX certified for use in zones 1 and 2 areas without the need for
a hot work permit. It can perform a wide range of grinding tasks using the varied files supplied as part
of the system. The files are designed to provide a range of practical solutions when working with steel
and with non-ferrous materials, specifically aluminium and also passive fire protection materials such
as chartek and fendolite materials.
KEY FEATURES
COLD WORK PERMIT
EASE OF USE
SAFETY TRIGGER
UNIVERSAL AIR CONNECTION
Datasheet
GRO-SHH-ENG-DTS-007-Straight Grinder System Data Sheet
MM860i ID montert flensemaskin
An internally mounted, lightweight and robust flange facing machine using fixed gears to produce continuous groove gramophone finishes to ASME Standard.
Key Features
Precision construction
Geared continuous groove facing feeds for a gramophone finish (ASME Standard)
Quick set independent base for improved on-site operation
Hardened slide ways to maintain long term accuracy
Swivel tool post for groove details; reduces need for separate accessories
Supplied with 3 different base sizes
Clamping Range 5,9"-32" (150mm-864mm)
Max facing range 34" (153mm-864mm)
FF424 Flange Facer ID mount
Air powered FF 424 flange facing machine faces from 4in (101.6mm) ID to 24in (609.6mm) OD up to a 16in 150# flange. Fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Kit complete with HD air motor, mandrel, 23 leg extension sets, tool slide, tooling and storage case.
Features:
Faces flanges from 4in (101.6mm) ID to 24in (609.6mm) OD
Record grove, RMS 500, 250, 125 and 63 finishes
Kit complete with HD air motor and storage case
Product line
User manual
Travel Cutter SD
When E.H. Wachs is mentioned, the product that often comes to mind is our famous Trav- L-Cutter (pronounced “Travel Cutter”). First introduced in 1949, this portable milling machine is designed to cut and bevel simultaneously from 6in-72in O.D. (DN150–1800) on most pipe and vessel materials and schedules (optional drive chain sections required for OD greater than 48in).
Secured by its mounting/drive chain, the Trav-L-Cutter SD drives itself around the pipe as it machines, producing a weld ready surface. Driving around the circumference of the workpiece gives the Trav-L-Cutter SD an advantage over other machine tool types – the ability to accommodate any workpiece diameter by simply adding/adjusting the mounting/drive chain length.
More info
Video
34mm Chain Cutter
Chain cutter 34mm for use with ROV subsea, can also be used for topside cutting
32290-DS-001 Equipment Datasheet, CC34
