Click to enlarge

ECC External Casing Cutter

FECC External Casing Cutter utilizes Wachs split frame technology to cut a wide range of casing conductors externally above the wellhead. The ECC split frame mounts around the exposed casing O.D. above the wellhead and simultaneously cuts and chamfers. Ring sizes are available for most grades and weights of the exposed external casing (or drive pipe/conductor) up to a 26” (660mm) diameter, with the ECC 814 AIR being the most common.

The ECC is based on Wachs proven split frame portable machine tool and takes advantage of the wide range of standard Genuine Wachs Tooling, requiring minimal axial and radial clearances. The ECC is available with pneumatic or hydraulic drive options. Remote handheld controls are optionally available for pneumatic powered machines.

Features:
External casing (drive pipe/conductor) cutting and beveling up to a 26” (660mm) diameter
Utilizes standard Wachs Genuine Tooling for severing and chamfering
Based on DynaPrep MDSF Split Frame technology
Requires minimal axial and radial clearances; hydraulic or pneumatic drive

Video
Product line

Kontaktskjema

Send oss en forespørsel så tar vi kontakt med deg.

post@norse-cutting.com
Innhent pristilbud
Kategorier: ,
Beskrivelse

ECC External Casing Cutter utilizes Wachs split frame technology to cut a wide range of casing conductors externally above the wellhead. The ECC split frame mounts around the exposed casing O.D. above the wellhead and simultaneously cuts and chamfers. Ring sizes are available for most grades and weights of the exposed external casing (or drive pipe/conductor) up to a 26” (660mm) diameter, with the ECC 814 AIR being the most common.

The ECC is based on Wachs proven split frame portable machine tool and takes advantage of the wide range of standard Genuine Wachs Tooling, requiring minimal axial and radial clearances. The ECC is available with pneumatic or hydraulic drive options. Remote handheld controls are optionally available for pneumatic powered machines.
Datablad

Pipe Outside Diameter Range (OD):
2in-26in (50.8mm-660.4mm)

Part Number:
ECC-814-AIR

Warranty:
1 Year Limited Warranty

Relaterte produkter

Travel Cutter SD

, , , ,
When E.H. Wachs is mentioned, the product that often comes to mind is our famous Trav- L-Cutter (pronounced “Travel Cutter”). First introduced in 1949, this portable milling machine is designed to cut and bevel simultaneously from 6in-72in O.D. (DN150–1800) on most pipe and vessel materials and schedules (optional drive chain sections required for OD greater than 48in). Secured by its mounting/drive chain, the Trav-L-Cutter SD drives itself around the pipe as it machines, producing a weld ready surface. Driving around the circumference of the workpiece gives the Trav-L-Cutter SD an advantage over other machine tool types – the ability to accommodate any workpiece diameter by simply adding/adjusting the mounting/drive chain length. More info Video
Innhent pristilbud

SDSF Socket Weld Removal

, , ,
Precision socket weld removal is easily accomplished with the E.H. Wachs socket weld removal system. Utilizing the SDSF Small Diameter Split Frame as its foundation, our machine are offered in both axial and radial versions, depending on clearances or which component may need to be sacrificed. Fits available SDSF range of .5” to 6” (12.7 to 152.4mm) outside diameter. Datasheet Product line
Innhent pristilbud

EICC External Internal Casing Cutter

,
Wachs EICC External Internal Casing Cutter Kit is designed to cut and chamfer the casing internally below the wellhead, required for specific BOP installations. It is used in combination with an ECC Kit which makes the external cut required before installing the EICC. Once the external cut is made, the MDSF split frame from the ECC Kit serves as the drive platform for the EICC. A wellhead adaptor is required to mount the MDSF, either our universal adapter or a custom adapter built to your specifications, which serves as the mounting point between the wellhead and the MDSF. The EICC is assembled to the MDSF and lowered into the casing, and can be configured to cut down to a depth of 60in (1524mm). A reversing air motor is required and part of the EICC Kit, run forward to advance the tooling, then backwards to retract the tooling prior to extraction and completion. Features: Internal casing cuts from 7in (179mm) to 13 3/8in (340mm) casings Configurable to cut to an internal depth of 60in (1524mm) Used in conjunction with DynaPrep MDSF based ECC External Casing Cutter Requires universal or custom wellhead adaptor, sold separately Video
Innhent pristilbud

TAF630 Flense maskin

,
A lightweight, portable, flange facing, grooving and weld preperation machine designed to machine full faced, raiced face and grooved flanges from 0mm-630mm (0''-25'') OD Mount 203-660mm (8-26") TAF630 Video
Innhent pristilbud

SpeedPrep Pipe Bevelers Range 0-24 Inches

,
Wachs SpeedPrep SDB line of small diameter bevelers have been engineered for fast, precise onsite facing, beveling, compound beveling and counterboring of light and heavy wall pipe, tube or casing. Proven workhorses, they set up quickly with a self centering mandrel and chuck assembly mounting to the pipe I.D. Three models are available to prep from .875in-12.75in (22.2mm-323.9mm) O.D. Wachs SpeedPrep EP 424 with the advanced AutoPrep autofeed system is a precision I.D. mount end prep machine tool designed to bevel, compound bevel, J prep, face and counterbore pipe, fittings and valves. Utilizing the revolutionary AutoPrep mechanism that feeds simultaneously in the axial and radial planes, the SpeedPrep EP 424 is simple to use, even for an inexperienced operator. It is powerful enough to form tool from 4in to 16in (DN100-400) through Schedule 160, and will single point from 4in-24in (DN100-600) up to a 6.5in (165mm) wall thickness. Product line SDB Product line EP424 Video EP424 model Video SDB model
Innhent pristilbud

34mm Chain Cutter

, , ,
Chain cutter 34mm for use with ROV subsea, can also be used for topside cutting 32290-DS-001 Equipment Datasheet, CC34
Innhent pristilbud

OD40 Speedfacer Flensemaskin

,
The H&S TOOL SPEED FACER™ family are designed with safety and productivity-enhancing features that separate this line of machines from the competition. The remote feed control and auto-feed system allows for hands-free machining, keeping operators hands away from moving parts. The customized setup fingers and leveling feet allow the operator to easily set up the machine making it possible to go from crate-to-cut in 15 minutes or less. With infinitely variable feed rates and the ability to rotate the tool head and bits 360°, the SPEED FACER™ family has increased flexibility for higher metal removal, variable surface finishes, and the ability to create a variety of cuts. Mounting Range 29,2-40,5" (742-1029mm) Mounting range with feet extension 19.2 – 40.5 in. (488 – 1029 mm) Facing Diameter range 0 – 40.5 in. (0 – 1029 mm) Pneumatic or Hydraulic – Belt Drive Video of custom machining
Innhent pristilbud

TAF330 Flense maskin

,
TAF330 Flange Facer for flange size 2-13" ¨ Type: external mounting ¨ Min.-max. facing: 0-330mm DIA ¨ Min.-max. clamping: 80-330mm DIA ¨ Axial movement: Manually adjustable ¨ Axial feed: 70 mm ¨ Radial movement: Trip feed system ¨ Radial feed: 165 mm ¨ Each activator= feed of 0,16mm/rev ¨ 6 activators= Max. feed rate of 1mm/ rev ¨ RTJ grooves machining ¨ Bores and conical machining Video TAF series
Innhent pristilbud