Dimensjon |
---|
AX 012 Flense maskin
A lightweight, portable, flange facing, grooving
and weld preperation machine designed
to machine full faced, raiced face
and grooved flanges from
0mm-305mm (0»-12»)
Kategorier: Mobil dreiemaskiner, Top side
Relaterte produkter
Drilling Machine, Multi-Axial Power Drill 5 1/4»
The perfect drill for industrial applications, the Wachs
Multi-Axial Power Drill is extremely versatile, designed to
meet the unexpected needs encountered in the field. It is
built of corrosion resistant materials and totally configurable.
Whatever your application, the new variable speed, Multi-Axial
Power Drill will get the job done.
Powerdrill Brochure
31649-DS-01 Equipment Datasheet PowerDrill
Video
FF424 Flange Facer ID mount
Air powered FF 424 flange facing machine faces from 4in (101.6mm) ID to 24in (609.6mm) OD up to a 16in 150# flange. Fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Kit complete with HD air motor, mandrel, 23 leg extension sets, tool slide, tooling and storage case.
Features:
Faces flanges from 4in (101.6mm) ID to 24in (609.6mm) OD
Record grove, RMS 500, 250, 125 and 63 finishes
Kit complete with HD air motor and storage case
Product line
User manual
DynaPrep LDSF Large Diameter Split Frame Clamshell Pipe Cutters/Bevelers 75-120 inch range
E. H. Wachs LDSF Large Diameter Split Frame with hydraulic drive is designed for cold cutting, beveling, facing and counterboring on large diameter pipes, vessels and flanges. It’s been engineered to incorporate multiple advancements designed to make it stronger and faster to set up and operate. Picking up where our MDSF split frames leave off, four standard LDSF Large Diameter Split Frame sizes will cover a range from 60in-120in O.D. (DN1500-DN3000). Each machine covers a 15in (381mm) diameter range and will simultaneously cut and bevel most wall thicknesses and materials.
The internal, full bearing construction contributes to the LDSF Large Diameter Split Frame's smooth operation and long service life. Spring loaded O.D. (outside diameter) tracking slides for irregularly shaped or out-of-round pipe and vessels are standard, and allow the tooling to maintain continuous contact, producing precision weld preps with consistent lands. A new new CRBM Counterboring and Reverse Bevel module counterbores in vertical orientation, and reverse bevels in angled orientation. The LDSF Large Diameter Split Frame takes corrosion protection to a new level with virtually every surface treated. Its attractive red powder coated finish proudly reflects E.H. Wachs corporate colors.
Product line
Datasheet
Video
Conductor/rør Vasker 26-32»
26-32'' Conductor cleaner
Lightweight & easy to handle
Video Conductor cleaner
369 Equipment Datasheet - Conductor Cleaner
FF313 Flange Facer ID mount
FF 313 flange facing machine faces from 3in (76.2mm) ID to 13in (330.2mm) OD up to a 6in 400# flange. Pneumatic powered machine offers fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Kit complete with HD air motor, mandrel, 18 leg extension sets, tool slide, tooling and storage case
Features:
Faces flanges from 3in (76.2mm) ID to 13in (330.2mm) OD
Record grove, RMS 500, 250, 125 and 63 finishes
Kit complete with air motor and storage case
FF Product line
User manual
6-48in Split Frame (SF) Bridge Slides series
E.H. Wachs DynaPrep MDSF Split Frame Bridge Slide is a multi-purpose accessory tool slide that can be configured for beveling, compound beveling, J preps, counterboring and facing flanges in your choice of finish.
The DynaPrep MDSF Bridge Slide kits fit the previous generation Wachs LCSF Low Clearance Split Frame without modification, and can be fitted to the DynaPrep MDSF with the required DynaPrep MDSF Bridge Slide Mounting Kit. Cannot be used where obstructions exist across the Bridge Slide operating area, such as in heat exchangers.
More info and models
FF1200 OD MOUNT FLANGE FACER
This safe, versatile, and rugged OD Mount Flange Facer can machine flanges up to 12.5 inches (317.5 mm) in diameter without any attachments. Designed for the rugged challenges of the oil, gas and chemical industry, this machine has the versatility to machine seven different flange types, including RTJ and compact flanges. With feed controls located remotely for “hands-free machining,” the FF1200 sets a new standard in operator safety while delivering up to 30% time savings on flange facing jobs.
31653-DS-001 Equipment Datasheet FF1200