6-48in Split Frame (SF) Bridge Slides series
E.H. Wachs DynaPrep MDSF Split Frame Bridge Slide is a multi-purpose accessory tool slide that can be configured for beveling, compound beveling, J preps, counterboring and facing flanges in your choice of finish.
The DynaPrep MDSF Bridge Slide kits fit the previous generation Wachs LCSF Low Clearance Split Frame without modification, and can be fitted to the DynaPrep MDSF with the required DynaPrep MDSF Bridge Slide Mounting Kit. Cannot be used where obstructions exist across the Bridge Slide operating area, such as in heat exchangers.
Relaterte produkter
DynaPrep SDSF Small Diameter Split Frame Clamshell Pipe Cutters/Bevelers
The DynaPrep SDSF is a pipe cutting and beveling tool used by pipefitters and welders in weld preparation for industrial pipe. E.H. Wachs SDSF Small Diameter Split Frames are the smallest and most compact member of the Wachs split frame family of pipe cutters, and are designed for cutting, beveling and counterboring pipe and tubing from .5 inch - 6 inch O.D. (DN15-150). Like all our split frame, clamshell style machines the DynaPrep SDSF Small Diameter Split Frame is designed to “split” in half to fit over inline pipe, or can be slipped closed over open ended pipe. Six models are available in 1 inch (25.4mm) increments, with additional sizes available by special order.
The SDSF is ideal anywhere pipe and tube are arrayed in tight places, such as pipe racks, and finds many uses in power generation, oil and gas and shipbuilding. The SDSF operates on air or electric power using standard Wachs motors and adaptors, and is part of a complete system that includes a broad range of tool slides and accessories for maximum versatility. As with all E.H. Wachs products, the DynaPrep Small Diameter Split Frame is built with our legendary quality and durability for years of reliable service.
More info
Datablad
Product line
tooling sheet
Videos
Pipe beveling
34mm Chain Cutter
Chain cutter 34mm for use with ROV subsea, can also be used for topside cutting
32290-DS-001 Equipment Datasheet, CC34
EICC External Internal Casing Cutter
Wachs EICC External Internal Casing Cutter Kit is designed to cut and chamfer the casing internally below the wellhead, required for specific BOP installations. It is used in combination with an ECC Kit which makes the external cut required before installing the EICC. Once the external cut is made, the MDSF split frame from the ECC Kit serves as the drive platform for the EICC.
A wellhead adaptor is required to mount the MDSF, either our universal adapter or a custom adapter built to your specifications, which serves as the mounting point between the wellhead and the MDSF. The EICC is assembled to the MDSF and lowered into the casing, and can be configured to cut down to a depth of 60in (1524mm). A reversing air motor is required and part of the EICC Kit, run forward to advance the tooling, then backwards to retract the tooling prior to extraction and completion.
Features:
Internal casing cuts from 7in (179mm) to 13 3/8in (340mm) casings
Configurable to cut to an internal depth of 60in (1524mm)
Used in conjunction with DynaPrep MDSF based ECC External Casing Cutter
Requires universal or custom wellhead adaptor, sold separately
Video
FF424 Flange Facer ID mount
Air powered FF 424 flange facing machine faces from 4in (101.6mm) ID to 24in (609.6mm) OD up to a 16in 150# flange. Fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Kit complete with HD air motor, mandrel, 23 leg extension sets, tool slide, tooling and storage case.
Features:
Faces flanges from 4in (101.6mm) ID to 24in (609.6mm) OD
Record grove, RMS 500, 250, 125 and 63 finishes
Kit complete with HD air motor and storage case
Product line
User manual
SDSF Socket Weld Removal
Precision socket weld removal is easily accomplished with the E.H. Wachs socket weld removal system. Utilizing the SDSF Small Diameter Split Frame as its foundation, our machine are offered in both axial and radial versions, depending on clearances or which component may need to be sacrificed. Fits available SDSF range of .5” to 6” (12.7 to 152.4mm) outside diameter.
Datasheet
Product line
TAF630 Flense maskin
A lightweight, portable, flange facing, grooving
and weld preperation machine designed
to machine full faced, raiced face
and grooved flanges from
0mm-630mm (0''-25'')
OD Mount 203-660mm (8-26")
TAF630 Video
AX 012 Flense maskin
A lightweight, portable, flange facing, grooving
and weld preperation machine designed
to machine full faced, raiced face
and grooved flanges from
0mm-305mm (0''-12'')
32445-DS-001 Equipment Datasheet AX012
OD40 Speedfacer Flensemaskin
The H&S TOOL SPEED FACER™ family are designed with safety and productivity-enhancing features that separate this line of machines from the competition. The remote feed control and auto-feed system allows for hands-free machining, keeping operators hands away from moving parts. The customized setup fingers and leveling feet allow the operator to easily set up the machine making it possible to go from crate-to-cut in 15 minutes or less. With infinitely variable feed rates and the ability to rotate the tool head and bits 360°, the SPEED FACER™ family has increased flexibility for higher metal removal, variable surface finishes, and the ability to create a variety of cuts.
Mounting Range 29,2-40,5" (742-1029mm)
Mounting range with feet extension 19.2 – 40.5 in. (488 – 1029 mm)
Facing Diameter range 0 – 40.5 in. (0 – 1029 mm)
Pneumatic or Hydraulic – Belt Drive
Video of custom machining
