PUMPS
The Hi-Force range of manual and hydraulic pumps consists of a number of models. The series consists of manual, battery-powered, electric, air and petrol-powered motors.
Categories: Hydraulic equipment, Top side
Related products
6-48in Split Frame (SF) Bridge Slide series
E.H. Wachs DynaPrep MDSF Split Frame Bridge Slide is a multi-purpose accessory tool slide that can be configured for beveling, compound beveling, J preps, counterboring and facing flanges in your choice of finish.
The DynaPrep MDSF Bridge Slide kits fit the previous generation Wachs LCSF Low Clearance Split Frame without modification, and can be fitted to the DynaPrep MDSF with the required DynaPrep MDSF Bridge Slide Mounting Kit. Cannot be used where obstructions exist across the Bridge Slide operating area, such as in heat exchangers.
More info
TAF630 Flange Facer
A lightweight, portable, flange facing, grooving
and weld preperation machine designed
to machine full faced, raiced face
and grooved flanges from
0mm-305mm (0''-12'')
32445-DS-001 Equipment Datasheet AX012
OD40 Speedfacer
Wachs EICC External Internal Casing Cutter Kit is designed to cut and chamfer the casing internally below the wellhead, required for specific BOP installations. It is used in combination with an ECC Kit which makes the external cut required before installing the EICC. Once the external cut is made, the MDSF split frame from the ECC Kit serves as the drive platform for the EICC.
The H&S TOOL SPEED FACER™ family are designed with safety and productivity-enhancing features that separate this line of machines from the competition. The remote feed control and auto-feed system allows for hands-free machining, keeping operators hands away from moving parts. The customized setup fingers and leveling feet allow the operator to easily set up the machine making it possible to go from crate-to-cut in 15 minutes or less. With infinitely variable feed rates and the ability to rotate the tool head and bits 360°, the SPEED FACER™ family has increased flexibility for higher metal removal, variable surface finishes, and the ability to create a variety of cuts.
Mounting Range 29,2-40,5" (742-1029mm)
Mounting range with feet extension 19.2 – 40.5 in. (488 – 1029 mm)
Facing Diameter range 0 – 40.5 in. (0 – 1029 mm)
Pneumatic or Hydraulic – Belt Drive
Video of custom machining
SpeedPrep Pipe Bevelers Range 0-24 Inches
Wachs SpeedPrep SDB line of small diameter bevelers have been engineered for fast, precise onsite facing, beveling, compound beveling and counterboring of light and heavy wall pipe, tube or casing. Proven workhorses, they set up quickly with a self centering mandrel and chuck assembly mounting to the pipe I.D. Three models are available to prep from .875in-12.75in (22.2mm-323.9mm) O.D.
Wachs SpeedPrep EP 424 with the advanced AutoPrep autofeed system is a precision I.D. mount end prep machine tool designed to bevel, compound bevel, J prep, face and counterbore pipe, fittings and valves. Utilizing the revolutionary AutoPrep mechanism that feeds simultaneously in the axial and radial planes, the SpeedPrep EP 424 is simple to use, even for an inexperienced operator. It is powerful enough to form tool from 4in to 16in (DN100-400) through Schedule 160, and will single point from 4in-24in (DN100-600) up to a 6.5in (165mm) wall thickness.
Product line SDB
Product line EP424
Video EP424 model
Video SDB model
FF206 Flange facer ID mount
F 206 flange facing machine faces from 2in (50.8mm) ID to 6in 152.4mm) OD, up to a 2in 150# flange. Pneumatic powered model features fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Pneumatic kit complete with HD air motor, mandrel, 7 leg extension sets, tool slide, tooling and storage case.
Features:
Faces flanges from 2in (50.8mm) ID to 6in 152.4mm) OD
Record grove, RMS 500, 250, 125 and 63 finishes
Kit complete with air motor and storage case
FF Product line
User manual
34mm Chain Cutter
Chain cutter 34mm for use with ROV subsea, can also be used for topside cutting
32290-DS-001 Equipment Datasheet, CC34
EX Straight grinder system
The straight grinder system is fully ATEX certified for use in zones 1 and 2 areas without the need for
a hot work permit. It can perform a wide range of grinding tasks using the varied files supplied as part
of the system. The files are designed to provide a range of practical solutions when working with steel
and with non-ferrous materials, specifically aluminium and also passive fire protection materials such
as chartek and fendolite materials.
KEY FEATURES
COLD WORK PERMIT
EASE OF USE
SAFETY TRIGGER
UNIVERSAL AIR CONNECTION
Datasheet
GRO-SHH-ENG-DTS-007-Straight Grinder System Data Sheet
EX Coating removal system
The Coating Removal System is fully ATEX certified for use in Zones 1 and
2 areas without the need for a Hot Work Permit. The innovative and unique
design of the rotating disc quickly and efficiently safely removes paint and
other coatings from metalwork prior to repair or re-coating
COLD WORK PERMIT
LARGE SURFACE AREA FOR EFFICIENT REMOVAL
EASE OF USE
SAFETY TRIGGER
UNIVERSAL AIR CONNECTION
Datasheet
GRO-SHH-ENG-DTS-008-Coating Removal System Data Sheet
Videos
NC Coating removal
Coating removal
PFP removal