Dimensjon |
---|
AX 012 Flange facer
A lightweight, portable, flange facing, grooving
and weld preperation machine designed
to machine full faced, raiced face
and grooved flanges from
0mm-305mm (0”-12”)
Categories: Flange Facing Equipment, Top side
Related products
TAF330 Flange facer
TAF330
Flange Facer for flange size 2-13″
¨ Type: external mounting
¨ Min.-max. facing: 0-330mm DIA
¨ Min.-max. clamping: 80-330mm DIA
¨ Axial movement: Manually adjustable
¨ Axial feed: 70 mm
¨ Radial movement: Trip feed system
¨ Radial feed: 165 mm
¨ Each activator= feed of 0,16mm/rev
¨ 6 activators= Max. feed rate of 1mm/
rev
¨ RTJ grooves machining
¨ Bores and conical machining
TAF series video
EX Straight grinder system
The straight grinder system is fully ATEX certified for use in zones 1 and 2 areas without the need for
a hot work permit. It can perform a wide range of grinding tasks using the varied files supplied as part
of the system. The files are designed to provide a range of practical solutions when working with steel
and with non-ferrous materials, specifically aluminium and also passive fire protection materials such
as chartek and fendolite materials.
KEY FEATURES
COLD WORK PERMIT
EASE OF USE
SAFETY TRIGGER
UNIVERSAL AIR CONNECTION
Datasheet
GRO-SHH-ENG-DTS-007-Straight Grinder System Data Sheet
EX Coating removal system
The Coating Removal System is fully ATEX certified for use in Zones 1 and
2 areas without the need for a Hot Work Permit. The innovative and unique
design of the rotating disc quickly and efficiently safely removes paint and
other coatings from metalwork prior to repair or re-coating
COLD WORK PERMIT
LARGE SURFACE AREA FOR EFFICIENT REMOVAL
EASE OF USE
SAFETY TRIGGER
UNIVERSAL AIR CONNECTION
Datasheet
GRO-SHH-ENG-DTS-008-Coating Removal System Data Sheet
Videos
NC Coating removal
Coating removal
PFP removal
FF424 Flange Facer ID Mount
Air powered FF 424 flange facing machine faces from 4in (101.6mm) ID to 24in (609.6mm) OD up to a 16in 150# flange. Fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Kit complete with HD air motor, mandrel, 23 leg extension sets, tool slide, tooling and storage case.
Features:
Faces flanges from 4in (101.6mm) ID to 24in (609.6mm) OD
Record grove, RMS 500, 250, 125 and 63 finishes
Kit complete with HD air motor and storage case
Product line
User manual
6-48in Split Frame (SF) Bridge Slide series
E.H. Wachs DynaPrep MDSF Split Frame Bridge Slide is a multi-purpose accessory tool slide that can be configured for beveling, compound beveling, J preps, counterboring and facing flanges in your choice of finish.
The DynaPrep MDSF Bridge Slide kits fit the previous generation Wachs LCSF Low Clearance Split Frame without modification, and can be fitted to the DynaPrep MDSF with the required DynaPrep MDSF Bridge Slide Mounting Kit. Cannot be used where obstructions exist across the Bridge Slide operating area, such as in heat exchangers.
More info
Conductor/Pipe cleaner 26-32”
26-32'' Conductor cleaner
Lightweight & easy to handle
Video Conductor cleaner
369 Equipment Datasheet - Conductor Cleaner
OD40 Speedfacer
Wachs EICC External Internal Casing Cutter Kit is designed to cut and chamfer the casing internally below the wellhead, required for specific BOP installations. It is used in combination with an ECC Kit which makes the external cut required before installing the EICC. Once the external cut is made, the MDSF split frame from the ECC Kit serves as the drive platform for the EICC.
The H&S TOOL SPEED FACER™ family are designed with safety and productivity-enhancing features that separate this line of machines from the competition. The remote feed control and auto-feed system allows for hands-free machining, keeping operators hands away from moving parts. The customized setup fingers and leveling feet allow the operator to easily set up the machine making it possible to go from crate-to-cut in 15 minutes or less. With infinitely variable feed rates and the ability to rotate the tool head and bits 360°, the SPEED FACER™ family has increased flexibility for higher metal removal, variable surface finishes, and the ability to create a variety of cuts.
Mounting Range 29,2-40,5" (742-1029mm)
Mounting range with feet extension 19.2 – 40.5 in. (488 – 1029 mm)
Facing Diameter range 0 – 40.5 in. (0 – 1029 mm)
Pneumatic or Hydraulic – Belt Drive
Video of custom machining
Travel Cutter SD
When E.H. Wachs is mentioned, the product that often comes to mind is our famous Trav- L-Cutter (pronounced “Travel Cutter”). First introduced in 1949, this portable milling machine is designed to cut and bevel simultaneously from 6in-72in O.D. (DN150–1800) on most pipe and vessel materials and schedules (optional drive chain sections required for OD greater than 48in).
Secured by its mounting/drive chain, the Trav-L-Cutter SD drives itself around the pipe as it machines, producing a weld ready surface. Driving around the circumference of the workpiece gives the Trav-L-Cutter SD an advantage over other machine tool types – the ability to accommodate any workpiece diameter by simply adding/adjusting the mounting/drive chain length.
More info
Video