6-48in Split Frame (SF) Bridge Slide series
E.H. Wachs DynaPrep MDSF Split Frame Bridge Slide is a multi-purpose accessory tool slide that can be configured for beveling, compound beveling, J preps, counterboring and facing flanges in your choice of finish.
The DynaPrep MDSF Bridge Slide kits fit the previous generation Wachs LCSF Low Clearance Split Frame without modification, and can be fitted to the DynaPrep MDSF with the required DynaPrep MDSF Bridge Slide Mounting Kit. Cannot be used where obstructions exist across the Bridge Slide operating area, such as in heat exchangers.
Categories: Cut & Bevle Machines, Sub Sea, Subsea cutting equipment, Top side
Description
Related products
JACKS
The Hi-Force range of hydraulic jacks offers a wide range of lifting capacities. Different material constructions and designs. From aluminum jack with steel toe for low heights. For large heavy lifts with steel jacks. The Hi-Force hydraulic jack range offers users a wide range to suit any application.
More info
ROV Super saw 20”
This easy-to-use, powerful saw is ideal for ROV-led operations. It is simple to set up and provides clean cut capability with limited blade wear, improving efficiency and performance.
31359-DS-01 Equipment Datasheet ROV Grinder
Dual Drilling Machine 42-63” Auto
Dual Drilling Machine Unit, 42-63"
Specifications:
Tubular Capacity: Clamping 42”- 63” (1066.8-1600.2mm) pipe
Drilling: Ø290, Stroke 620mm (24”) as standard.
Power Requirements
Hydraulic: 110 Liters per Minute @ 120 BAR
Ambient Conditions
Temperature (-20°C) - 50°C
Atmosphere Offshore, Saliferous, 100% humidity
Main Dimensions
LWH: 4100 x 1890 x 1000 mm
Weight net: 1305 kg (2877lb)
34033-DS-01 Equipment Datasheet, DDM 4263
SpeedPrep Pipe Bevelers Range 0-24 Inches
Wachs SpeedPrep SDB line of small diameter bevelers have been engineered for fast, precise onsite facing, beveling, compound beveling and counterboring of light and heavy wall pipe, tube or casing. Proven workhorses, they set up quickly with a self centering mandrel and chuck assembly mounting to the pipe I.D. Three models are available to prep from .875in-12.75in (22.2mm-323.9mm) O.D.
Wachs SpeedPrep EP 424 with the advanced AutoPrep autofeed system is a precision I.D. mount end prep machine tool designed to bevel, compound bevel, J prep, face and counterbore pipe, fittings and valves. Utilizing the revolutionary AutoPrep mechanism that feeds simultaneously in the axial and radial planes, the SpeedPrep EP 424 is simple to use, even for an inexperienced operator. It is powerful enough to form tool from 4in to 16in (DN100-400) through Schedule 160, and will single point from 4in-24in (DN100-600) up to a 6.5in (165mm) wall thickness.
Product line SDB
Product line EP424
Video EP424 model
Video SDB model
FF206 Flange facer ID mount
F 206 flange facing machine faces from 2in (50.8mm) ID to 6in 152.4mm) OD, up to a 2in 150# flange. Pneumatic powered model features fast, simple operation with record grove, RMS 500, 250, 125 and 63 finishes. Pneumatic kit complete with HD air motor, mandrel, 7 leg extension sets, tool slide, tooling and storage case.
Features:
Faces flanges from 2in (50.8mm) ID to 6in 152.4mm) OD
Record grove, RMS 500, 250, 125 and 63 finishes
Kit complete with air motor and storage case
FF Product line
User manual
ECC External Casing Cutter
ECC External Casing Cutter utilizes Wachs split frame technology to cut a wide range of casing conductors externally above the wellhead. The ECC split frame mounts around the exposed casing O.D. above the wellhead and simultaneously cuts and chamfers. Ring sizes are available for most grades and weights of the exposed external casing (or drive pipe/conductor) up to a 26” (660mm) diameter, with the ECC 814 AIR being the most common.
The ECC is based on Wachs proven split frame portable machine tool and takes advantage of the wide range of standard Genuine Wachs Tooling, requiring minimal axial and radial clearances. The ECC is available with pneumatic or hydraulic drive options. Remote handheld controls are optionally available for pneumatic powered machines.
Features:
External casing (drive pipe/conductor) cutting and beveling up to a 26” (660mm) diameter
Utilizes standard Wachs Genuine Tooling for severing and chamfering
Based on DynaPrep MDSF Split Frame technology
Requires minimal axial and radial clearances; hydraulic or pneumatic drive
Video
Product line
Travel Cutter SD
When E.H. Wachs is mentioned, the product that often comes to mind is our famous Trav- L-Cutter (pronounced “Travel Cutter”). First introduced in 1949, this portable milling machine is designed to cut and bevel simultaneously from 6in-72in O.D. (DN150–1800) on most pipe and vessel materials and schedules (optional drive chain sections required for OD greater than 48in).
Secured by its mounting/drive chain, the Trav-L-Cutter SD drives itself around the pipe as it machines, producing a weld ready surface. Driving around the circumference of the workpiece gives the Trav-L-Cutter SD an advantage over other machine tool types – the ability to accommodate any workpiece diameter by simply adding/adjusting the mounting/drive chain length.
More info
Video
Guillotine Pipe Saws
Guillotine Pipe Saws
The E.H. Wachs family of portable Guillotine pipe saws include models designed to cold cut pipe ranging from 2 inch - 32 inch (DN50-800), as well as solids such as bars stock, rails and beams. Their compact design and easy setup make it the ideal saw for contractors, pipeline operations, refineries, petrochemical and processing plants, and anywhere a fast, safe cut is needed. In use virtually everywhere, they’re strong yet lightweight, simple to mount, simple to operate and simply bulletproof.
Videos
Norse Cutting Guillotine saws
Guillotine industrial saws video